Easy installation
Thanks to the wide range of Tournus drain systems, it is always possible to find one that meets the exact needs of any installation. There are 120 models for use in canteen and restaurant kitchens and supermarkets, for tiles or resin floor coverings.
Characteristics applicable to all the floor drains:
- small dimensions for the reservation : installation of the floor drains does not require any sunken area in the slab. A reserved hole or core drilling diameter 225 mm will be adequate.
- outlet diameter 100 mm: this allows easy connection to the type of piping used most often.
Particular advantages:
- floor drain with adjustable bowl: the bowl that supports the grating is independent; it is suitable for a combined slab + tiling depth of 55 to 150 mm. The slab waterproofing can be created with an overlap into the casing prior to applying the screed. The bowl can be moved in all directions to make it easier to lay the tiles.
- floor drain with single-piece bowl: simplified model for installation without any need for re-waterproofing.
- floor drain with vertical outlet: the removable funnel-type trap makes cleaning of the whole drain easier.
- floor drain with horizontal outlet:lower heignt, thanks to the lateral outlet.
- floor drain with off-centre outlet to make subsequent operations easier when an appliance which is difficult to move is going to be installed over the drain.
Tournus pays great attention to the design and manufacture of its products in order to be able to guarantee durable use under the best possible conditions.
- made of stainless steel.
- the trap housing is press-drawn, with no weld in the area under water.
- the mesh size of the gratings is 19 x 19 mm, for easy passage of trolleys.
- the depth of water is 60 mm, in accordance with the “DTU” requirements.
- the outlet includes a cross to trap pieces of scrap
- the gratings, with a choice of either stainless steel or galvanised, can be cleaned in a sink.
- 4 litres per second.